Philips Se8881b/21 Quick Start Guide Manual English

SE8881B/21 Language

Download Philips Se8881b/21 Quick Start Guide Manual English

Sponsored links


Download Request Is In Process

Quick start guide - Page 1

Quick start guide SE888

..

What’s in the box - Page 2

Note * In multi-handset packs, there are additional handsets, chargers and power adapters. ** In some countries, you have to connect the line adapter to the line cord, then plug the line cord to the telephone socket. Caution • Use only the supplied batteries and power adapter. What’s in the box Handset * Base station Charger * Power adapter * Line cord ** CD rom Quick start guide Guarantee

..

Charge the batteries for 8 hours before first use. - Page 3

Connect the base station and charger Telephone socket Power socket Power adapter Power socket Extra handset charger Telephone base station 1 Connect each end of the power adapter to: • the DC input jack at the bottom of the base station; • the power socket on the wall. 2 Connect each end of the line cord to: • the telephone socket at the bottom of the base station; • the telephone socket on the wall. 3 For multi-handset version, connect each end of the power adapter to: • the DC input jack at the bottom of the extra handset charger. • the power socket on the wall. Note Charge th..

Configure your phone - Page 4

Configure your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). 3 Select your country, then press [OK] to confirm. 4 Set the date and time. • If the time is in 12-hour format, press * key to select [AM] or [PM] .

..

Charge the batteries for 8 hours before first use. - Page 5

Charge your phone Charge 8 hours Place the handset on the base station to charge the handset. When the handset is placed correctly on the base station, you hear a docking sound. » The handset starts charging. Note Charge the batteries for 8 hours before first use. Check the battery level When the handset is off the base station/charger, the bars indicate the battery level (full, medium and low). When the handset is on the base station/charger, the bars flash until charging completes. The empty battery icon flashes and you hear an alert tone. The battery is low and needs recharging.

..

Charge your mobile phone - Page 6

Charge your mobile phone Telephone base station 1 For iPhone users, connect the plug of your USB charging cable (not supplied) to the USB socket at the bottom of SE888. 2 For mobile phones with micro USB charging, connect the micro USB cable plug to the micro USB socket of the mobile phone.

..

Pair SE888 with your mobile phones - Page 7

2 Bluetooth Pair SE888 with your mobile phones Make sure the Bluetooth function of the mobile phones is activated and in searching status. Then you can do the pairing in this way: 1 On the base station, press MENU . 2 Select [Bluetooth] > [Find Me] . 3 Place the mobile phone close to the base station, then press [OK] to confirm. 4 On the mobile phone, select SE888 and connect. 5 Enter the PIN code (0000) on the mobile phone if necessary. » When SE888 and the mobile phone are paired, or is displayed on the screen of the handset and base station. Note • When the Bluetooth device list i..

Quick call from land line - Page 8

Call Quick call from land line Press / on the handset or on the base station and dial the phone number. Dial before you call 1 Dial the phone number on the handset or base station. 2 Press / to select the land line or Bluetooth line ( / / ) from which you want to make an outgoing call. 3 Then, you can either: • press / on the handset; or • press or on the base station and select a line or mobile phone to dial out the call. Note Make sure that the Line settings are set to [Home] for land line or [Mobile 1] / [Mobile 2] for Bluetooth line. For information, see Line settings in the Phone s..

Adjust the volume during a call - Page 9

Answer a call • When there is an incoming call from the land line, press / on the handset or on the base station. • When there is an incoming call from the Bluetooth line, press / on the handset or on the base station. • When there are incoming calls from the land line and Bluetooth line at the same time, press / on the handset/base station to select a call, then, • on the handset, press / ; or • on the base station, press or to pick up one of the calls. End a call • Press on the handset or on the base station. • Place the handset to the base station. Adjust the volume during ..

Record an announcement - Page 10

Record an announcement 1 Press [Menu] 2 Select > [Announcement] , then press [OK] to confirm. 3 Select [Answer & rec.] or [Answer only] , then press [OK] to confirm. 4 Select [Record new] , then press [OK] to confirm. 5 Start recording close to the microphone after the beep. 6 Press [OK] to stop recording. » You can listen to the newly recorded announcement on the handset.

..

Listen to messages recorded on the answering machine - Page 11

Listen to messages recorded on the answering machine cd b a a Switch on/off the answering machine: Press . b Start/Stop listening to the recorded messages: Press . c Adjust the volume: Press / . d Delete the current message: Press . Note For more information, see the Telephone answering machine section in the user manual.

..

Refer to the user manual that came with your new phone. - Page 12

Need help? User manual Refer to the user manual that came with your new phone. Online help www.philips.com/support Welcome to Philips Register your product at www.philips.com/welcome Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. © 2011 Koninklijke Philips Electronics N.V. All rights reserved. QSG_SE888_EN_V1.3 WK11285 0168

..

Sponsored links

Latest Update