Philips Se8881b/21 User Manual English

SE8881B/21 Language

Download Philips Se8881b/21 User Manual English

Sponsored links


Download Request Is In Process

Register your product and get support at - Page 1

Register your product and get support at www.philips.com/welcome SE888 EN User manual

..

EN - Page 3

3 EN

..

Enter the first character of a contact - Page 4

4 Call from the redial list 21 Call from the phonebook 21 Call from the call log 21 End a call 21 Answer a call 21 Divert the incoming call to the answering machine 22 Turn off the ringer for all incoming calls 22 Adjust the volume during a call 22 Mute the microphone 22 Turn the speaker on or off 22 Make a second call 22 Answer a second call 22 Toggle between two calls on the handset and base station 22 Toggle between two calls on the land line and Bluetooth line 23 Make a conference call with external callers 23 Make a conference call on the land line and Bluetooth line 23 6 Intercom and ..

EN - Page 5

5 Set the sound profile 41 15 Services 42 Access the services menu 42 Auto conference 42 Activate/Deactivate auto conference 42 Manage the carrier code 42 Activate auto removal of the carrier code 42 Deactivate auto removal of the area code 42 Manage the area code 43 Activate auto removal of the area code 43 Deactivate auto removal of the area code 43 Auto prefix 43 Set auto prefix 43 Network type 44 Select the recall duration 44 Dial mode 44 Set the dial mode 44 First ring 44 Turn the first ring on/off 44 Auto clock 45 Register the handsets 45 Auto registration 45 Manual registration 4..

Incoming messages (ICM) - Page 6

6 17 Telephone answering machine 50 Turn on/off the answering machine 50 Through the handset 50 Through the base 50 Set the answering machine language 50 Set the answer mode 50 Announcements 51 Record an announcement 51 Listen to the announcement 51 Restore the default announcement 51 Incoming messages (ICM) 51 Listen to the incoming messages 51 From the base 52 From the handset 52 Delete an incoming message 52 From the base 52 From the handset 52 Delete all old incoming messages 52 From the base 52 From the handset 52 Call screening 52 From the base 52 Set the sound quality of the message ..

The Electrical network is classified as hazardous. The - Page 7

7 To avoid damage or malfunction Caution • Use only the power supply listed in the user instructions. • Use only the batteries listed in the user instructions. • Do not allow the charging contacts or the battery to come into contact with metal objects. • Do not open the handset, base station or charger as you could be exposed to high voltages. • Do not allow the product to come into contact with liquids. • Risk of explosion if battery is replaced by an incorrect type. • Dispose of used batteries according to the instructions. • Always use the cables provided with the product..

When using the phone as a baby monitor - Page 8

8 When using the phone as a baby monitor Caution • Children should be supervised to ensure that they do not play with the appliance. • Make sure the baby unit and the cord are always out of reach of the baby (at least 1 metre/3 feet away). • Keep the parent unit at least 1.5 metres/5 feet away from the baby unit to prevent acoustic feedback. • Never place the baby unit inside the baby’s bed or playpen. • Never cover the parent unit and the baby unit with anything (e.g. a towel or blanket). Always make sure the cooling vents of the baby unit are free. • Take every precaution to..

* In some countries, you have to connect the line - Page 9

9 Power adapter** Line cord* Warranty Quick start guide CD rom Note • * In some countries, you have to connect the line adapter into the line cord, then plug the line cord into the telephone socket. 2 Your SE888 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. What is in the box Base station Handset** Charger** EN

..

Overview of the phone - Page 10

10 1 Earpiece 2 - Delete text or digits. - Cancel operation. - Enter the redial list. 3 - End the call. - Exit the menu/ operation. 4 - Scroll up on the menu. - Increase the earpiece/speaker volume. - Enter the phonebook. - Scroll down on the menu. - Decrease the earpiece/speaker volume. - Enter the call log. / - Move the cursor to the left/right in editing mode. 5 - Make a predial call. - Press and hold to enter a pause - Switch to upper/ lower case during editing. 6 - Mute/unmute the microphone. 7 Microphone 8 - It is displayed when the speaker phone is on. - Make and receive calls throug..

Overview of the base station - Page 11

11 1 - Find handsets - Enter registration mode 2 MENU - Enter the main menu screen. - Turn answering machine on/off. 3 Right soft key - Delete text or digits. - Cancel operation. - Select the function displayed on the screen directly above the key. - Play messages. - Stop messages playback. 4 - Scroll up on the menu. - Enter the phonebook. - Scroll down on the menu. - Enter the call log. 5 LCD display 6 Left soft key - Confirm option. - Enter the options menu. - Select the function displayed on the screen directly above the key. - Delete the current playback message. - Press and hold to de..

Main menu icons - Page 12

12 Icon Descriptions [Phone setup] - Set the date and time, ECO mode, handset name and display language. [Sounds] - Set the ring volume, ring tone, key tone etc. [Services] - Set the auto conference, auto prefix, network type, recall time, auto clock, dial mode, register/unregister handset, call services etc. The services are network and country dependent. [Alarm] - Set date and time, alarm, alarm tone etc. [Phonebook] - Add, edit, manage phonebook entries etc. [Call list] - Displays the call history of all missed or received calls. [Display] - Set the brightness, screen saver etc. [Baby m..

Display icons - Page 13

13 The Bluetooth function is activated. Number ‘1’ indicates mobile 1 while ‘2’ indicates mobile 2, in the active list of bluetooth device. White color means the device is in range or the service is available. Gray color means the device is added in the active list but is out of range or not available. Blank color means the corresponding active list has no device added. It is displayed when the baby monitor is set up. / It is displayed when you scroll up/ down a list/increase and decrease the volume. ECO The ECO mode is activated. Display icons In standby mode, the icons shown on th..

Install the handset - Page 14

14 • the DC jack at the bottom of the extra handset charger. • the power socket on the wall. 4 For mobile phones with micro USB charging, connect the micro USB cable plug to the micro USB socket of the mobile phone. 5 For iPhone users, connect the plug of your USB charging cable (not supplied) to the USB socket at the bottom of SE888. Install the handset The batteries are pre-installed in the handset. Pull off the battery tape from the battery door before charging. 3 Get started Caution • Make sure that you have read the safety instructions in the “Important” section before you co..

sunshine or fire. Never discard batteries in fire. - Page 15

15 3 Press the numeric buttons to enter the date and time. Note • If the time is in 12-hour format, press * on the handset/ base station to select [AM] or [PM] . 4 Press [OK] to confirm. Set the date and time format 1 Access the phone settings menu to set the date and time in either way: • On the handset, select [Menu] > > [Date & time] , then press [OK] to confirm. • On the base station, press MENU , select [Phone setup] > [Date & time] , then press [OK] to confirm. 2 Select [Date format] or [Time format] . 3 Press / on the handset or base station. 4 Select [DD/MM..

Charge the batteries for 8 hours before first use. - Page 16

16 What is standby mode? Your phone is in standby mode when it is idle. The standby screen displays the handset name and number/date and time, signal icon, and battery icon. Check the signal strength It displays the link status between the handset and base station. The more bars are shown, the better the connection is. • Make sure that the handset is linked to the base station before you make or receive calls and carry out the functions and features. • If you hear warning tones when you are on the phone, the handset is almost out of battery or the handset is out of range. Charge the bat..

Pair SE888 with your computer - Page 17

17 3 Place the mobile phone close to the base station, then press [OK] to confirm. » The mobile phone name is displayed on the screen. 4 On the mobile phone, select SE888 and connect. 5 Enter the PIN code on the mobile phone, if necessary. Tip • The default PIN code is 0000. » When SE888 and the mobile phone are paired, or is displayed on the screen of the handset and base station. Note • When the Bluetooth device list is full, remove some mobile phone names before pairing can start. • If the name of SE888 exists in your mobile phone, you have to remove it from your mobile phone. T..

Manage the devices list - Page 18

18 » The call log from the mobile phone is updated on the base station. Download the phonebook from the computer Install the PC software ‘ ThinkLink ’ saved in the cd rom or at http://www.philips.com/support 1 Double click on Setup.exe to start the installation. 2 Select the display language. 3 After the installation is done, select ‘?’ and follow the instructions to download the phonebook from the computer. Manage the devices list You can manage your Bluetooth devices list (mobile phones/computer) in this way: 1 On the base station, press MENU and select [Bluetooth] > [Device l..

A confirmation message is displayed. Press - Page 19

19 » The selected Bluetooth device is connected to/disconnect from Bluetooth. Rename the device 1 On the base station, press MENU . 2 Select [Bluetooth] > [Rename Me] , then press [OK] to confirm. » The current phone name is displayed. 3 Edit the name, then press [Save] to confirm. » The new phone name is displayed. Delete a device/Delete all devices on the list 1 On the base station, press MENU and select [Bluetooth] > [Device list] , then press [OK] to confirm. » The Bluetooth device list is displayed. 2 Select a Bluetooth device, press [Option] . 3 Select [Delete] / [Delete ..

Dial before you call - Page 20

20 Tip • If you select [Auto] on the handset, the idle line is pre-selected for an outgoing call, with [Home] as the highest priority. Then [Mobile 1] and [Mobile 2] . If you select [Manual] , select an icon among these three options. Dial before you call 1 Dial the phone number on the handset or base station. • To erase a digit, press [Clear] . • To enter a pause, press and hold . 2 Press / to select the land line or Bluetooth line ( / / ) from which you want to make an outgoing call. 3 Then, you can either: • press / on the handset; or • press /HOME or /MOBILE on the base statio..

Call from the redial list - Page 21

21 End a call You can end a call in these ways: • Press on the handset or / HOME on the base station; or • Place the handset to the base station. Answer a call • When there is an incoming call from the land line, press / on the handset or /HOME on the base station to answer the call. • When there is an incoming call from the Bluetooth line, press / on the handset or /MOBILE on the base station to answer the call. • When there are incoming calls from the land line and Bluetooth line at the same time, press / on the handset/base station to select a call, then, • on the handset, pr..

Tip - Page 22

22 1 You can make a second call in these ways: • Press on the handset or FLASH/ CALL WAIT on the base station during a call. • The first call is put on hold. • Press [Option] and select [Start 2nd call] , then press [OK] to confirm. • The current call is put on hold. 2 Dial the second number. » The number displayed on the screen is dialed out. Tip • For information of how to make a call through the land line or the Bluetooth line, see the section on “Make a call”. Answer a second call Note • It is a country-dependent setting. When there is a periodical beep to notify you ..

Note - Page 23

23 • Press and on the handset or FLASH/CALL WAIT and on the base station. • Press [Option] , select [Conference] and then press [OK] to confirm. » The two calls are combined and a conference call is established. Make a conference call on the land line and Bluetooth line You can make a two-line conference call through the land line and mobile line in this way: 1 Make an outgoing call with the land line. 2 When there is an incoming from the Bluetooth line, press [Option] , then select a mobile phone to answer the call. 3 Press [Option] to access the menu. » In the options menu, select ..

Toggle between calls - Page 24

24 2 Select a handset number, then press [OK] to confirm. » Wait for the other side to answer your call. Toggle between calls Press and hold * on the handset or INTERCOM on the base station to switch between the outside call and the intercom call. Transfer a call 1 Press and hold * on the handset or press INTERCOM on the base station during a call. » The handsets available for intercom are displayed. 2 Select a handset number, then press [OK] to confirm. 3 Press on the handset or /HOME on the base station when the other side answers your call. » The call is now transferred to the selec..

During the conference call - Page 25

25 2 Select or enter a handset number, then press [OK] to confirm. » The selected handset rings. 3 Press on the selected handset or INTERCOM on the base station. » The intercom is established. 4 Press [Conf] . » You are now in a 3-way conference call with an external call and a selected handset/base station. 5 Press on the handset or /HOME on the base station to end the conference call. Note • If [Services] > [Conference] is set to [Auto] , press [Conf] to join an ongoing conference with another handset. During the conference call You can press and hold * on the handset or press IN..

Enter text and numbers - Page 26

26 Key Lower case characters (for English/French/ German/ Italian/Turkish/Portuguese/ Spanish/Dutch/Danish/ Finnish/Norwegian/ Swedish) 0 [Sp] . 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \ ^ ~ | 1 1 @ _ # = < > ( ) & € £ $ ¥ [ ] { } ¤ § … 2 a b c 2 à â æ á ã ä å ç 3 d e f 3 è é ê ë Δ Φ 4 g h i 4 ğ í ì ï ı Γ 5 j k l 5 Λ 6 m n o 6 ñ ó ô õ ö ò 7 p q r s 7 β ş Π Θ Σ 8 t u v 8 ù ú ü μ 9 w x y z 9 ø Ω Ξ Ψ Key Upper case characters (for Greek) 0 [Sp]. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \^ ~| 1 1 @ _ # = < > ( ) & £ $ ¥ [ ] { } ¤ § ..

27 - Page 27

27 Key Lower case characters (for Romanian/Polish/Czech/ Hungarian/Slovakian/ Slovenian/Croatian) 0 [Sp] . 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \ ^ ~ | 1 1 @ _ # = < > ( ) & € £ $ ¥ [ ] { } ¤ § … 2 a b c 2 à â æ á ă ä å ą ć č 3 d e f 3 ď đ ė ě è é ę Δ Φ 4 g h i 4 í ì Γ 5 j k l 5 Λ 6 m n o 6 ñ ň ó ö ő ò 7 p q r s 7 ř š ś Π Θ Σ ß 8 t u v 8 ţ ť ù ú û ü ů ǚ ű 9 w x y z 9 ý ž ƒ ø Ω Ξ Ψ Key Upper case characters (for Greek) 0 [Sp]. 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \^ ~| 1 1 @ _ # = < > ( ) & £ $ ¥ [ ] { } ¤ § ....

Switch between the upper - Page 28

28 Key Lower case characters (for Serbian/Bulgarian) 0 [Sp] . 0 , / : ; “ ‘ ! ¡ ? ¿ * + - % \ ^ ~ | 1 1 @ _ # = < > ( ) & € £ $ ¥ [ ] { } ¤ § … 2 a b c 2 à æ ä å 3 d e f 3 è é Δ Φ 4 g h i 4 ì Γ 5 j k l 5 Λ 6 m n o 6 ñ ö ò 7 p q r s 7 Π Θ Σ ß 8 t u v 8 ù ü 9 x y z 9 ø Ω Ξ Ψ Switch between the upper case and lower case By default, the first letter of each word in a sentence is upper case and the rest is lower case. Press to switch between the upper case and lower case letters. EN

..

Scroll the contact list - Page 29

29 View the phonebook Tip • You can view the phonebook on either the handset or base station only. 1 Access the phonebook directories on the handset/base station (see “Access the phonebook directories” in the previous paragraph in this chapter). 2 Press / on the handset or base station to scroll through the phonebook entries. 3 Select a contact and view the detailed information. Download the phonebook from the mobile phone or computer Tip • For information, see”Synchronize the phonebook and call log” in the “Bluetooth” section. Search a record You can search the phonebook re..

If your phonebook memory is full, a notification - Page 30

30 Add a record Note • If your phonebook memory is full, a notification message is displayed on the handset. Delete some records to add new ones. 1 Access the phonebook directories on the handset/base station (see “Access the phonebook directories” in the previous paragraph in this section). 2 Select [Option] > [Add new] , then press [OK] to confirm. 3 Enter the name, then press [OK] to confirm. 4 Enter the number, then press [Save] to confirm » Your new record is saved. Tip • Press and hold to insert a pause. Note • The phonebook only saves new number entries. Tip • For..

identification service before you can use this feature. - Page 31

31 2 Select a contact, then select [Option] > [Delete] . Press [OK] to confirm. » A confirmation request is displayed on the handset. 3 Select [OK] to confirm. » The record is deleted. Delete all records 1 Access the phonebook directories on the handset/base station (see “Access the phonebook directories” in the previous paragraph in this chapter). 2 Select a contact, then select [Option] > [Delete all] . Press [OK] to confirm. » A confirmation request is displayed on the handset. 3 Press [OK] to confirm. » All records are deleted. 2 Select a contact, then select [Option..

9 Call log - Page 32

32 Tip • Press [Update] to update the call log. On the base station , 1 Press . 2 Select the call log from the land line ( [Home] ) or Bluetooth line ( [Mobile 1] or [Mobile 2] ). » The call log is displayed. View the call records 1 Access the call log menu on the handset/ base station (see “Access the call records” in the previous paragraph in this chapter). 2 Select a record, then press [OK] to view the available information. Download the phonebook from the mobile phone or computer Tip • For information, see”Synchronize the phonebook and call log” in the “Bluetooth” secti..

Tip - Page 33

33 Delete all call records 1 Access the call log menu on the handset/ base station (see “Access the call records” in the previous paragraph in this chapter). 2 Select [Option] > [Delete all] , then press [OK] to confirm. » A confirmation request is displayed on the handset. 3 Press [OK] to confirm. » All records are deleted. Tip • If you select [Auto] on the handset, the idle line is pre-selected for an outgoing call, with [Home] as the highest priority. Then [Mobile 1] and [Mobile 2] . If you select [Manual] , select an icon among these three options. Save a call record to th..

10 Redial list - Page 34

34 Save a redial record to the phonebook 1 Access the redial list on the handset/base station (see “Access the redial list” in the previous paragraph in this chapter). 2 Select a record, then press [Option] to confirm. 3 Select [Save number] , then press [OK] to confirm. 4 Enter and edit the name, then press [OK] to confirm. 5 Enter and edit the number, then press [Save] to confirm. » The record is saved. Delete a redial record 1 Access the redial list on the handset/base station (see “Access the redial list” in the previous paragraph in this chapter). 2 Select a record, then p..

Delete all redial records - Page 35

35 Delete all redial records 1 Access the redial list on the handset/base station (see “Access the redial list” in the previous paragraph in this chapter). 2 Select [Option] > [Delete all] , then press [OK] to confirm. » A confirmation request is displayed on the handset. 3 Press [OK] to confirm. » The record is deleted. EN

..

11 Phone settings - Page 36

36 3 Select [On] / [Off] , and press [OK] to confirm. » The setting is saved. » ECO is displayed in standby mode. Note • When ECO is activated, the connection range between the handset and the base station can be reduced. Name the handset The name of the handset can be up to 14 characters. It is displayed on the handset screen in standby mode. 1 Access the “Phone settings” menu on the handset or base station (see “Access the phone settings menu” in the previous paragraph in this chapter). 2 Select [Phone name] , then press [OK] to confirm. 3 Enter or edit the name. To erase a ..

Line settings - Page 37

37 the phone settings menu” in the previous paragraph in this chapter). 2 Select [Language] , then press [OK] to confirm. 3 Select a language, then press [OK] to confirm. » The setting is saved. Line settings You can select to access the land line or the Bluetooth lines. 1 Access the “Phone settings” menu on the handset or base station (see “Access the phone settings menu” in the previous paragraph in this chapter). 2 Select [Line settings] , then press [OK] to confirm. 3 Select a new setting, then press [OK] to confirm. » The setting is saved. Tip • If you select [Auto] o..

Access the Alarm menu - Page 38

38 7 Select [Alarm tone] , then press [OK] . 8 Select a tone from options, then press [OK] to confirm. » The alarm is set and is displayed on the screen. Tip • Press * to switch between [AM] / [PM] . 12 Alarm clock Your phone has a built-in alarm clock. Check the information in the following paragraphs to set your alarm clock. Access the Alarm menu On the handset Select [Menu] > , then press [OK] to confirm. On the base station 1 Press MENU . 2 Select [Alarm] , then press [OK] to confirm. Set the alarm 1 Access the “Alarm” menu on the handset or base station (see “Access the ..

Access the Display menu - Page 39

39 13 Display settings You can change the brightness of the display, color theme, and screen saver of the phone. Access the Display menu On the handset Select [Menu] > , then press [OK] to confirm. Set the display 1 Access the “Display settings” menu on the handset (see “Access the Display settings menu” in the previous paragraph in this chapter). 2 Select [Display] , then press [OK] to confirm. 3 Select [Brightness]/[Clock]/[Screen saver] , then press [OK] to confirm. 4 Select an option, then press [OK] to confirm. EN

..

to find your handset, or when you - Page 40

40 1 Access the “Sounds” menu on the handset/ base station (see “Access the sounds menu” in the previous paragraph in this chapter). 2 Select [Ring tones] , then press [OK] to confirm. 3 Select a ringtone, then press [OK] to confirm. » The setting is saved. Set the silent mode You can set your phone to silent mode and enable the silent mode for a specified duration. When the silent mode is activated, your phone does not ring or send any alerts or sound. Note • When you press to find your handset, or when you activate the alarm, your phone still sends an alert even when the si..

Set the sound profile - Page 41

41 1 Access the “Sounds” menu on the handset/ base station (see “Access the sounds menu” in the previous paragraph in this chapter). 2 Select [Key tone] , then press [OK] to confirm. 3 Select [On] / [Off] , then press [OK] to confirm. » The setting is saved. Set the docking tone Docking tone is the sound made when you place the handset on the base station or charger. 1 Access the “Sounds” menu on the handset/ base station (see “Access the sounds menu” in the previous paragraph in this chapter). 2 Select [Docking tone] , then press [OK] to confirm. 3 Select [On] / [Off] ,..

This feature only applies to models with carrier code - Page 42

42 Manage the carrier code Note • This feature only applies to models with carrier code support. You can define a carrier code (up to 5 digits). This carrier code is automatically removed from an incoming call if it matches with the code you define. Then the phone number is saved in the call log without a carrier code. Activate auto removal of the carrier code 1 Access the “Services” menu on the handset or base station (see “Access the services menu” in the previous paragraph in this chapter). 2 Select [Carrier code] , then press [OK] to confirm. 3 Enter the carrier code, then ..

maximum length of an auto prefix number is 10 digits. - Page 43

43 number can replace the detect number you set in the menu. For example, you set 604 as the detect number and 1250 as the prefix. When you have dialed out a number such as 6043338888, your phone changes the number to 12503338888 when it dials out. Note • The maximum length of a detect number is 5 digits. The maximum length of an auto prefix number is 10 digits. Set auto prefix 1 Access the “Services” menu on the handset or base station (see “Access the services menu” in the previous paragraph in this chapter). 2 Select [Auto prefix] , then press [OK] to confirm. 3 Enter the ..

Turn the first ring on/off - Page 44

44 Dial mode is the telephone signal used in your country. The phone supports tone (DTMF) and pulse (rotary) dial. Consult the service provider for detailed information. Set the dial mode 1 Access the “Services” menu on the handset or base station (see “Access the services menu” in the previous paragraph in this chapter). 2 Select [Dial mode] , then press [OK] to confirm. 3 Select a dial mode, then press [OK] to confirm. » The setting is saved. Note • If your phone is in pulse dial mode, press * during a call for temporary tone mode. Digits entered for this call are then sent o..

certain period, your handset displays a notification - Page 45

45 Auto registration Place the unregistered handset on the base station. » The handset detects the base station and registers automatically. » Registration is completed in less than 2 minutes. The base station automatically assigns a number to the handset. Manual registration If auto registration fails, register your handset manually to the base station. 1 Access the “Services” menu on the handset (see “Access the services menu” in the previous paragraph in this chapter). 2 Select [Register] , then press [OK] to confirm. 3 Press and hold on the base station for 5 seconds until yo..

Unregister the handsets - Page 46

46 Call forward You can divert your calls to another phone number. You can select among 3 options: • [Call forward] : divert all incoming calls to another number. • [Call fwd busy] : divert calls when the line is busy. • [Call fwd unans] : divert calls when no one answers. Activate/Deactivate call forward 1 Access the “Services” menu on the handset or base station (see “Access the services menu” in the previous paragraph in this chapter). 2 Select [Call Services] > [Call forward] / [Call fwd busy] / [Call fwd unans] 3 Select [Activate] / [Deactivate] , then press [OK] to co..

Restore default settings - Page 47

47 Edit the cancel call-back service number 1 Access the “Services” menu on the handset or base station (see “Access the services menu” in the previous paragraph in this chapter). 2 Select [Call Services] > [Cancel call bk] > [Settings] , then press [OK] to confirm. 3 Enter or edit the number, then press [OK] to confirm. » The setting is saved. Hide your identity You can hide your identity from the caller. Activate ID withheld 1 Access the “Services” menu on the handset or base station (see “Access the services menu” in the previous paragraph in this chapter). 2 Sel..

For information about the default settings, see the - Page 48

48 1 Access the “Services” menu on the handset or base station (see “Access the services menu” in the previous paragraph in this chapter). 2 Select [Reset] , then press [OK] to confirm. » A confirmation request is displayed on the handset. 3 Press [OK] to confirm. » All settings are reset. Tip • For information about the default settings, see the section on “Default settings”. EN

..

Send to an external line - Page 49

49 2 Select the handset number, then press [OK] to confirm. Send to an external line 1 Select [Menu] > > [Send alert to] > [External line] , then press [OK] to confirm. 2 Enter a telephone number, then press [OK] to confirm. Set the baby cry level 1 Select [Menu] > > [Baby cry level] , then press [OK] to confirm. 2 Select a new setting, then press [OK] to confirm. » The setting is saved. 16 Baby monitor Your phone supports the baby monitor function which sends an alert when the sound level exceeds the set limit. You can access the baby monitor menu through the handset. ..

Through the handset - Page 50

50 Note • When the answering machine is switched on, it answers incoming calls after a certain number of rings based on the ring delay setting. Set the answering machine language Note • This feature only applies to models with multiple- language support. The answering machine language is the language for the announcements. 1 Select [Menu] > > [Voice language] , then press [OK] to confirm. 2 Select a language, then press [OK] to confirm. » The setting is saved. Set the answer mode You can set the answering machine and select if the callers can leave messages. Select [Answer &..

Incoming messages (ICM) - Page 51

51 Note • You can no longer listen to the announcement when you pick up an incoming call. Restore the default announcement 1 Select [Menu] > > [Announcement] , then press [OK] to confirm. 2 Select [Answer & rec.] or [Answer only] , then press [OK] to confirm. 3 Select [Use default] , then press [OK] to confirm. » The handset displays a confirmation request. 4 Press [OK] to confirm. » The default announcement is restored. Incoming messages (ICM) Each message can be up to 3 minutes long. When you receive new messages, the new message indicator flashes on the answering mach..

You can only delete the read messages. No deleted - Page 52

52 Delete all old incoming messages From the base Press and hold in standby mode. » All old messages are permanently deleted. From the handset 1 Select [Menu] > > [Delete all] , then press [OK] to confirm. » The handset displays a confirmation request. 2 Press [OK] to confirm. » All old messages are permanently deleted. Note • You can only delete the read messages. No deleted messages can be recovered. Call screening You can hear the caller while he is leaving a message. Press to answer the call. From the base Press / to adjust the speaker volume during call screening. The low..

[Toll - Page 53

53 Change the PIN code 1 Select [Menu] > > [Remote access] > [Change PIN] , then press [OK] to confirm. 2 Enter the old PIN, then press [OK] to confirm. 3 Enter the new PIN code, then press [OK] to confirm. 4 Enter the new PIN code again, then press [OK] to confirm. » The setting is saved. Activate/deactivate the remote access You can allow or block remote access to the answering machine. 1 Select [Menu] > > [Remote access] , then press [OK] to confirm. 2 Select [Activate] / [Deactivate] , then press [OK] to confirm. » The setting is saved. Access the answering machin..

When there is no message, the phone hangs up - Page 54

54 Note • When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds. Remote access commands Key Function 1 Repeat the current or listen to the previous message. 2 Listen to messages. 3 Skip to the next message. 6 Delete the current message. 7 Switch the answering machine on. (not available when you listen to the messages). 8 Stop listening to the message. 9 Switch the answering machine off. (not available when you listen to the messages). EN

..

*Country dependent features - Page 55

55 18 Default settings Language* Country dependent Handset name PHILIPS Date 01/01/11 Date format* Country dependent Time* Country dependent Time format* Country dependent Alarm [Off] Phonebook list Unchanged Recall time* Country dependent First ring* Country dependent Conference [Off] Dial mode* Country dependent Handset ring melody* Country dependent Receiver volume [Volume 3] Handset ring volume [Level 3] Handset key beep [On] Incoming call log Empty Redial list Empty Line settings [Auto] Answering Machine Ans machine status [On] Ans machine mode [Answer & rec.] Base call screening [..

19 Technical data - Page 56

56 19 Technical data Display • 64 color TFT display General telephone features • Dual mode caller name & number identification • Conference call and voice mails • Intercom • Maximum talk time: 22 hours Phonebook list, Redial list and Call log • Phonebook list with 200 entries for the land line, 500 entries for mobile 1 and 500 entries for mobile 2. • Redial list with 20 entries • Call log with 50 entries Battery • Ni-MH AAA 1.2V 750mAh Power adapter Base • SSW-2207XX, Input: 230 V, 50Hz 0.2A, Output: 5.5V 1.5A Charger • SSW-2095XX-1, Input: 100 – 240V, 50- 60Hz ..

20 Notice - Page 57

57 put the base station in registration mode, then follow the procedure described in the handset manufacturer’s instructions. Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producin..

Trademarks - Page 58

58 owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Koninklijke Philips Electronics N.V. is under license. iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative conseq..

21 Frequently - Page 59

59 • Check and upgrade the OS (operation system) version of your mobile phone/ iphone. I can neither pair the SE888 with my mobile phone, nor synchronize the phonebook or call log. • You can find the list of mobile phones which are compatible with SE888 in Bluetooth compatibility list for SE888.pdf saved in the CD rom or at http://www. philips.com/support • When the Bluetooth device list is full, remove the mobile phone/computer name before pairing can start. • If the mobile phone name exists in your mobile phone, you have to remove it from your mobile phone. Then you can do the pa..

specified in the section “Text and number”. If - Page 60

60 Make sure that the handset ringtone is turned on. The caller ID does not display. • The service is not activated. Check with your service provider. • The caller’s information is withheld or unavailable. Note • If the above solutions do not help, disconnect the power supply from both the handset and base station. Try again after 1 minute. There is unknown text/symbols displayed on the phonebook list. Normally, SE888 can recognize the text/symbols specified in the section “Text and number”. If you still find unknown text/symbols, you are recommended to change them to English ..

0168 - Page 62

IFU_SE888_EN_V2.0 WK12245 0168 © 2011 Koninklijke Philips Electronics N.V. All rights reserved.

..

Sponsored links

Latest Update